CTS RWD V8-6.2L SC (2009)
Sunroof / Moonroof Track: Procedures
Sunroof Track Timing/Synchronization
Removal Procedure
1. Place the module in the closed/flush position.
2. Lower the headliner. Refer to Headlining Trim Panel Replacement (See: Interior Moulding / Trim/Headliner/Service and Repair).
3. Disconnect the electrical connector from the motor/actuator.
4. Remove the motor/actuator. Refer to Sunroof Motor/Actuator Replacement (See: Sunroof / Moonroof Motor/Service and Repair).
5. Push the cam assembly (2) forward until the timing hole (3) in the cam is aligned with the timing hole (4) in the lifter arm (1).
Note: Both mechanisms should now be in the closed position.
Using a suitable tool, insert it into the hole of the mechanism arm, it will not go all the way through mechanism.