CTS RWD V8-6.2L SC (2009)
6. Insert a pin (1) in the holes on both sides of the module to hold the position while installing the drive motor.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the sunroof window. Refer to Sunroof Window Replacement - Front (See: Sunroof / Moonroof Panel/Service and Repair). Tighten the
screws to 4 Nm (35 lb in).
2. Install the motor/actuator. Refer to Sunroof Motor/Actuator Replacement (See: Sunroof / Moonroof Motor/Service and Repair). Tighten the
motor attachment screws to 3.5 Nm (31 lb in).
3. Connect the electrical connector to the motor/actuator.
4. Remove the pin (1) from the holes that held the position while installing the drive motor.
5. Install the headliner. Refer to Headlining Trim Panel Replacement (See: Interior Moulding / Trim/Headliner/Service and Repair).
6. Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process (See: Testing and
Inspection/Programming and Relearning).
7. Verify the operation of the sunroof.