CTS Sedan AWD V6-3.0L (2010)
Parking Brake Lever: Service and Repair
Parking Brake Lever Pedal Assembly Replacement
Parking Brake Lever Pedal Assembly Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Pull down on the intermediate park brake cable and disconnect the front park brake cable from the intermediate park brake cable connector (1).
3. Release the front park brake cable conduit (2) from the vehicle underbody.
Compress the locking tabs on the cable conduit to release the conduit from the underbody.
4. Remove the park brake release handle. Refer to Parking Brake Release Handle Assembly Replacement (See: Parking Brake Release Handle
Assembly Replacement).
5. Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement (Left Hand Drive) (See: Body and Frame/Interior Moulding /