CTS Sedan AWD V6-3.0L (2010)
5. Install the power brake booster auxiliary pump assembly to the engine.
6. Install the power brake booster auxiliary pump bracket M6 bolt (1) and tighten to 10 Nm (89 lb in).
7. Install the power brake booster auxiliary pump bracket M12 bolt (2) and tighten to 70 Nm (52 lb ft).
8. Install the power brake booster auxiliary pump hose quick connect (1).
9. Connect the power brake booster auxiliary pump electrical connector.
10. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (LP1, LY7) (See: Powertrain Management/Fuel Delivery
and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement)Fuel Injector Sight Shield Replacement (LLT) (See:
Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).
