DeVille DHS V8-4.6L VIN Y (2000)
Subframe: Service and Repair
Rear Body Mount Replacement (FE1, FE3)
Removal Procedure
1. Raise and support vehicle. Refer to Vehicle Lifting.
2. Remove the tires wheels. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
3. Using a block of wood and a suitable jack, support the rear support assembly.
4. Remove two rear support assembly bolts.
5. Remove the exhaust system. Refer to Exhaust System Replacement in Exhaust System.
6. Lower the rear of the support assembly.
7. Remove two bolts at the body mount.
8. Remove the rear body mount.
Installation Procedure