DeVille DHS V8-4.6L VIN Y (2000)
1. Install the rear body mount.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts securing the body mount.
Tighten the bolts to 77 Nm (57 ft. lbs.).
3. Raise the support assembly and exhaust.
4. Install the two rear bolts securing the support assembly to the vehicle body.
Tighten the bolts to 191 Nm (141 ft. lbs.).
5. Install the four exhaust,hangers.
6. Install the tires and wheels. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
Tighten the wheel nuts to 125 Nm (80 ft. lbs.).
7. Lower the vehicle.
8. Inspect and adjust rear toe. Refer to Rear Toe Adjustment (FE1, FE3) or Rear Toe Adjustment (FE7) in Alignment.
