Seville V8-300 4.9L (1991)
If the Service Parts Identification Label is not available, the correct insulator part number can be determined by measuring the stabilizer shaft diameter
on insulator surface or on a clean area of the shaft.
If new bushing does not stay seated properly or works out of the existing bracket, install new brackets, P/N 3547358 on the left side, and P/N 3547359
on the right side.
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
For vehicles repaired under warranty, use:
Labor Operation
Labor Time
E2180
0.5 hr.