SRX 2WD V8-4.6L VIN A (2004)
17. Connect the intermediate park brake cable (2) to the front park brake cable connector.
18. Position the brake pipe bracket (2) to the body studs.
19. Install the brake pipe bracket retaining nuts (1).
Tighten the nuts to 10 N.m (89 lb in).
20. Connect the rear brake lines (1) at the forward rear wheelhouse.
Tighten the lines to 27 N.m (20 lb ft).
21. Connect the head lamp leveling sensor harness connector.
22. Connect the head lamp leveling wiring harness to the frame.
23. Connect the rear suspension position sensor harness connector.
24. Connect the rear suspension position sensor harness to the frame.
25. Connect the ABS wiring harness to the upper control arms.
