SRX AWD V6-3.0L (2010)
7. Remove the brake rotor bolt (1).
8. Remove the brake rotor (1).
Installation Procedure
1. If installing a new brake rotor, clean the friction surfaces of the brake rotor with denatured alcohol.
2. Using the CH-42450-A - Wheel Hub Resurfacing Kit , thoroughly clean any rust or corrosion from the mating surface of the hub/axle flange.
3. Using the CH-41013 - Rotor Resurfacing Kit , thoroughly clean any rust or corrosion from the mating surface of the rotor to the hub/axle flange.
4. Adjust the parking brake. Refer to Parking Brake Adjustment (See: Parking Brake System/Adjustments).