SRX AWD V6-3.0L (2010)
*
Allow the threadlocker to cure approximately 10 minutes before installation.
10. Position the brake caliper and bracket assembly (1) to the vehicle.
11. Install the brake caliper bracket bolts (1) and tighten to 110 Nm (81 lb ft).
12. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
13. Enable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Enabling (See: Parking Brake System/Parking Brake
Cable/Service and Repair/Procedures/Parking Brake Cable Adjuster Enabling).