SRX AWD V6-3.0L (2010)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Bracket Replacement
Brake Pressure Modulator Valve Bracket Replacement
Removal Procedure
1. Place the ignition switch in the OFF position.
2. Without draining the coolant or removing the hoses, remove and position aside the radiator surge tank. Refer to Radiator Surge Tank Replacement
(LF1) (See: Engine, Cooling and Exhaust/Cooling System/Coolant Reservoir/Service and Repair/Radiator Surge Tank Replacement)Radiator
Surge Tank Replacement (LAU) (See: Engine, Cooling and Exhaust/Cooling System/Coolant Reservoir/Service and Repair/Radiator Surge Tank
Replacement).
3. Remove the brake pressure modulator valve (BPMV) assembly. Refer to Brake Pressure Modulator Valve Replacement (See: Brake Pressure
Modulator Valve Replacement).
4. Remove the BPMV bracket bolts (1).
