cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Rear Cross-Member|Service and Repair|Page 7379 > < Control Arm Bushing|Service and Repair|Page 7374
Page 1
background image

Rear Cross-Member: Service and Repair

Rear Suspension Support Replacement (AWD)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the tires and wheels. Refer to Tire and Wheel Removal and Installation   (See: Wheels and Tires/Service and Repair).
3. Remove the exhaust muffler. Refer to Exhaust Muffler Replacement (LF1)   (See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service

and Repair)Exhaust Muffler Replacement (LAU)   (See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair).

4. Remove the left park brake cable from the support. Refer to Parking Brake Rear Cable Replacement - Left Side (FWD)   (See: Brakes and

Traction Control/Parking Brake System/Parking Brake Cable/Service and Repair/Removal and Replacement/Parking Brake Rear Cable
Replacement - Left Side)Parking Brake Rear Cable Replacement - Left Side (AWD)   (See: Brakes and Traction Control/Parking Brake
System/Parking Brake Cable/Service and Repair/Removal and Replacement/Parking Brake Rear Cable Replacement - Left Side).

5. Remove the right park brake cable from the support. Refer to Parking Brake Rear Cable Replacement - Right Side (FWD)   (See: Brakes and

Traction Control/Parking Brake System/Parking Brake Cable/Service and Repair/Removal and Replacement/Parking Brake Rear Cable
Replacement - Right Side)Parking Brake Rear Cable Replacement - Right Side (AWD)   (See: Brakes and Traction Control/Parking Brake
System/Parking Brake Cable/Service and Repair/Removal and Replacement/Parking Brake Rear Cable Replacement - Right Side).

6. Remove shock absorber lower fastener. Refer to Shock Absorber Replacement   (See: Suspension Strut / Shock Absorber/Service and Repair/Rear

Suspension Shock Absorber).

7. Remove rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement   (See: Brakes and Traction Control/Antilock Brakes / Traction

Control Systems/Wheel Speed Sensor/Service and Repair/Rear Wheel Speed Sensor Replacement).

8. Remove the lower control arms from the vehicle. Refer to Rear Axle Lower Control Arm Replacement   (See: Control Arm/Service and

Repair/Rear Suspension/Rear Axle Lower Control Arm Replacement).

9. Remove the upper control arms from the vehicle. Refer to Rear Axle Upper Control Arm Replacement   (See: Control Arm/Service and

Repair/Rear Suspension/Rear Axle Upper Control Arm Replacement).

10. Remove reinforcement arm bolts to body (1).
11. Remove the outer fastener adjustment links. Refer to Adjust Link Replacement   (See: Steering/Tie Rod/Service and Repair/Rear Suspension).
12. Remove the rear wheel drive shafts. Refer to Rear Wheel Drive Shaft Replacement   (See: Transmission and Drivetrain/Drive Axles, Bearings and

Joints/Axle Shaft Assembly/Service and Repair).

13. Remove the differential carrier assembly. Refer to Differential Carrier Assembly Replacement   ().
14. Remove the stabilizer bar. Refer to Stabilizer Shaft Replacement   (See: Stabilizer Bar/Service and Repair/Rear Suspension).
15. Position a transmission jack under the rear support and firmly secure the support to the jack with straps.
16. Mark up support position to body with spray paint.

Rear Cross-Member|Service and Repair|Page 7379 > < Control Arm Bushing|Service and Repair|Page 7374