SRX AWD V6-3.0L (2010)
Constant Velocity Joint: Service and Repair
Rear Wheel Drive Shaft Outer Joint and Boot Replacement
Rear Wheel Drive Shaft Outer Joint and Boot Replacement
Special Tools
*
CH 48894 - Drive Axle Boot Clamp Pliers
*
DT 8059 - Snap Ring Pliers
*
DT 35910 - Drive Axle Boot Clamp Pliers
For equivalent regional tools, refer to Special Tools (See: Tools and Equipment).
Disassemble Procedure
1. Remove the wheel drive shaft from the vehicle. Refer to Rear Wheel Drive Shaft Replacement (See: Service and Repair).
2. Install the wheel drive axle shaft in a soft jawed vice.