SRX AWD V6-3.0L (2010)
scratches, or the primed surfaces.
8. Shake the pinch-weld primer black #3 for at least 1 minute.
9. Use a new dauber in order to apply the primer to the surface of the pinch-weld flange (1).
10. Allow the pinch-weld primer to dry for approximately 10 minutes.
11. With the aid of an assistant, dry fit the window (1) to the opening in order to determine the correct position.
12. If equipped, ensure that the windshield locator pins are positioned into the locator slots on the upper pinch-weld flange.
13. Use masking tape in order to mark the locations (1) of the window (2) in the opening.
14. Cut the masking tape in the center and remove the window from the opening.
Note: Use care when applying window prep clear #1 on the window. This primer dries almost instantly, and may stain the viewing area of the
window if not applied evenly.
