SRX AWD V6-3.6L (2008)
1. Slide the rotation motor on to the driveshaft.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) ,
2. Install the rotation motor mounting bolts (2).
Tighten the bolts to 7 N.m (62 lb in).
3. Connect the electrical connector to the rotation motor.
4. Install the outer recliner arm pivot covers.
5. Install the outer recliner arm cover screws (1).
Tighten the screws to 2 N.m (18 lb in).