SRX AWD V6-3.6L (2008)
6. Install the inner recliner arm covers (1) to the seat back.
7. Install the rear seat back cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement (See: Seat Back/Service and Repair/Rear
Seat Number 2 Back Cushion Cover and Pad Replacement) .
8. Install the head restraints. Refer to Rear Seat Number 2 Head Restraint Replacement (See: Head Rest/Service and Repair/Rear Seat Number 2
Head Restraint Replacement)
9. Install the rear seat back panel. Refer to Rear Seat Number 2 Back Cushion Panel Replacement (See: Seat Back/Service and Repair/Rear Seat
Number 2 Back Cushion Panel Replacement) .
10. Install the seat in the vehicle. Refer to Rear Number 2 Folding Seat Replacement (See: Service and Repair/Removal and Replacement/Rear
Number 2 Folding Seat Replacement) .
11. Calibrate the seat. Refer to Power Folding Seat Calibration (See: Service and Repair/Procedures/Power Folding Seat Calibration) .
Rear Seat Number 2 Back Pivot Actuator Motor Replacement - Cushion
Rear Seat Number 2 Back Pivot Actuator Motor Replacement - Cushion
Removal Procedure
1. Remove the seat cushion frame. Refer to Rear Seat Number 2 Cushion Frame Replacement (See: Seat Cushion/Service and Repair/Rear Seat
Number 2 Cushion Frame Replacement) .
2. Disconnect the drive cables from the horizontal motor (1).
3. Disconnect the electrical connector from the motor.
4. Remove the motor.
Installation Procedure