SRX AWD V6-3.6L (2008)
Seat Back: Service and Repair
Rear Seat Number 1 Back Replacement - Left Side
Rear Seat Number 1 Back Replacement - Left Side
Removal Procedure
1. Remove the seat from the vehicle. Refer to Rear Seat Replacement (See: Service and Repair/Removal and Replacement/Rear Seat Replacement) .
2. Remove the left seat cushion. Refer to Rear Seat Cushion Replacement - Left Side (See: Seat Cushion/Service and Repair/Rear Seat Cushion
Replacement - Left Side) .
3. Remove the pivot trim cover screws (1).
4. Remove the outer pivot covers.
5. Disconnect the J-channel retainers (1).
6. Remove the seat back retaining bolts (2).
7. Remove the seat back from the seat adjuster.
Installation Procedure
1. Install the seat back on to the seat adjuster.