SRX AWD V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the seat back retaining bolts (2).
Tighten the bolts to 35 N.m (26 lb ft).
3. Connect the J-channel retainers (1).
4. Install the pivot cover screws (1).
Tighten the screws to 2 N.m (18 lb in).
5. Install the seat cushion. Refer to Rear Seat Cushion Replacement - Left Side (See: Seat Cushion/Service and Repair/Rear Seat Cushion
Replacement - Left Side) .
6. Install the seat into the vehicle. Refer to Rear Seat Replacement (See: Service and Repair/Removal and Replacement/Rear Seat Replacement) .