SRX AWD V6-3.6L (2008)
1. Connect the park brake release cable (1) to the park brake pedal assembly release lever (2).
2. Install the park brake release cable housing (2) to the park brake pedal assembly (1).
3. Install the park brake pedal and front park brake cable assembly (1) to the mounting bracket.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the park brake pedal assembly attaching nuts (3).
Tighten the park brake pedal assembly mounting nuts to 25 N.m (18 lb ft).
5. Install the park brake pedal assembly cross bar mounting bolt (2).
Tighten the park brake pedal cross bar mounting bolt to 10 N.m (88 lb in).