SRX AWD V6-3.6L (2008)
12. Install the upper condenser mounting bolts.
Tighten the bolts to 6.5 N.m (58 lb in).
13. Install the lower condenser mounting bolts.
Tighten the bolts to 6.5 N.m (58 lb in).
14. Lower the vehicle.
15. Install the electric cooling fan assembly. Refer to Engine Cooling Fan Replacement (LY7 - Gas, 6 Cylinder, 3.6L, SFI, V6) (See: Radiator
Cooling Fan/Service and Repair) .
16. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716 -Vac N Fill Coolant Refill Tool) (See: Service and Repair
)Cooling System Draining and Filling (Static Fill) (See: Service and Repair) .
