SRX AWD V6-3.6L (2008)
7. Install the EN 46110 above the applicable cylinder as shown.
Caution: Compressed valve springs have high tension against the valve spring compressor. Valve springs that are not properly compressed by or
released from the valve spring compressor can be ejected from the valve spring compressor with intense force. Use care when compressing or
releasing the valve spring with the valve spring compressor and when removing or installing the valve stem keys. Failing to use care may cause
personal injury.
Notice: Do not compress the valve springs less than 24.0 mm (0.943 in). Contact between the valve spring retainer and the valve stem oil seal can
cause potential valve stem oil seal damage.
8. Tighten the EN 46110 valve spring compressor nut (2).
9. Using the EN 46117 , remove the valve keepers.
10. Loosen the EN 46110 valve spring compressor nut.
11. Remove the valve spring retainer.
