SRX AWD V6-3.6L (2008)
12. Connect the purge solenoid valve electrical connector.
13. Connect the brake booster vacuum hose to the intake manifold.
14. Install the air inlet duct. Refer to Air Cleaner Inlet Duct Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Air
Cleaner Fresh Air Duct/Hose/Service and Repair) .
15. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement) .
