SRX AWD V6-3.6L (2008)
1. Install the recirculation actuator.
Notice: Refer to Fastener Notice .
2. Install the recirculation actuator screws.
Tighten the screws to 1 N.m (9 lb in).
3. Connect the electrical connector to the recirculation actuator.
4. Install the air inlet assembly. Refer to Air Inlet Assembly Replacement (Left Hand Drive) (See: Air Duct/Service and Repair/Air Inlet Assembly
Replacement (Left Hand Drive))Air Inlet Assembly Replacement (Right Hand Drive) (See: Air Duct/Service and Repair/Air Inlet Assembly
Replacement (Right Hand Drive)) .