SRX AWD V6-3.6L (2008)
Important: Reposition the power steering cooler aside to aid in removing the condenser.
15. Reposition the power steering cooler.
16. Remove the condenser.
Installation Procedure
1. If replacing the condenser, add the specified amount of PAG oil directly to the condenser. Refer to Refrigerant System Capacities (See:
Specifications/Capacity Specifications) .
2. Install the condenser.
3. Reposition the power steering cooler into position.
4. Install a new O-ring to the condenser tube. Refer to O-Ring Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair) .
5. Connect the condenser tube to the condenser.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
