SRX AWD V6-3.6L (2008)
8. Remove the auxiliary evaporator outlet line nut from the auxiliary HVAC module at the underside of the vehicle.
9. Disconnect the auxiliary evaporator outlet line from the auxiliary evaporator.
10. Disconnect the auxiliary evaporator outlet line from the body retainer clip.
11. Remove and discard the O-ring.
12. Lower the vehicle.
13. Remove the left body side trim panel. Refer to Body Side Rear Trim Panel Replacement (w/TB5) (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair)Body Side Rear Trim Panel Replacement (w/o TB5) (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair) .
14. Disconnect the electrical connectors from the auxiliary HVAC module.
15. Remove the air duct from the auxiliary HVAC module.
16. Remove the auxiliary HVAC module bolts from the vehicle.
17. Remove the auxiliary HVAC module from the vehicle.
Installation Procedure