SRX AWD V6-3.6L (2008)
6. Install the HVAC line clamp.
7. Install the HVAC line clamp screw.
Tighten the screw to 1 N.m (9 lb in).
8. Install the insulation (1) onto the lines and TXV.
9. Install the instrument panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement (Left Hand Drive) (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Carrier Replacement (Right Hand Drive) (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair) .
10. Evacuate the A/C system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and Recharging) .
11. Leak test the fittings of the component using J 39400-A .