SRX AWD V6-3.6L (2008)
Tighten the sensor to 9.8 N.m (87 lb in).
3. Connect the electrical connector (1) to the A/C refrigerant pressure sensor.
4. Install the front air deflector.
5. Install the front air deflector retainers.
6. Lower the vehicle.
7. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and
Recharging) .
8. Leak test the fittings of the component using J 39400-A .