SRX AWD V6-3.6L (2008)
Transmission Fluid Cooler Flushing and Flow Test (J 45096) (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Testing and
Inspection/Component Tests and General Diagnostics/6L50/6L80/6L90 - Automatic Transmission/Transmission Fluid Cooler Flushing and Flow
Test (J 45096)) for complete J 45096 operating instructions. Use the FLOW position on the main function switch to pump the fluid.
5. Check the fluid level. Refer to Transmission Fluid Check (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Testing and
Inspection/Component Tests and General Diagnostics/6L50/6L80/6L90 - Automatic Transmission/Transmission Fluid Check) .
Check Plug Method
Check Plug Method
Important: When the oil level check plug is removed with the engine OFF, transmission fluid may drain from the hole.
1. Remove the oil level check plug.
2. Install the DT 47784 (1) and, if necessary, one adapter from the J 45096-30 (2).
3. Determine the approximate amount of fluid needed to fill the transmission, based on the repair performed. Refer to Fluid Capacity Specifications (