SRX AWD V6-3.6L (2008)
1. Install new O-rings to the auxiliary front discharge line. Refer to O-Ring Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C
Coupler O-ring/Service and Repair) .
2. Install the auxiliary front discharge line to the vehicle.
3. Connect the auxiliary front discharge line to the body retainers.
4. Connect the auxiliary front discharge line to the auxiliary rear discharge line.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the fitting of the auxiliary front discharge line.
Tighten the fitting to 9 N.m (80 lb in).
6. Connect the auxiliary front discharge line to the front discharge line.
7. Install the auxiliary front discharge line to front discharge line quick connect fitting. Refer to Air Conditioning Line/Tube Connector
Removal/Replacement (See: Air Conditioning Line/Tube Connector Removal/Replacement) .
8. Lower the vehicle.
