SRX AWD V6-3.6L (2008)
5. Install the seat belt retractor.
Ensure that the anti-rotation tab on the seat belt retractor is located properly on the seat frame before tightening the retractor fastener.
6. Install the retaining bolt.
Tighten the bolt to 26 N.m (19 lb ft).
7. Install the roller assembly cover.
8. Install the roller assembly screws.
Tighten the fasteners to 5 N.m (44 lb in).
9. Ensure proper operation of the seat belt retractor.
10. Install the seat back cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (See: Body and Frame/Seats/Seat
Back/Service and Repair/Front Seat Back Cushion Cover and Cushion Pad Replacement) .
11. Install the front seat. Refer to Bucket Seat Replacement (See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Bucket Seat
Replacement) .
12. Confirm proper operation of the seat belt retractors.
