SRX AWD V6-3.6L (2008)
Suspension Strut / Shock Absorber: Service and Repair
Rear Suspension Shock Absorber
Shock Absorber Replacement
Shock Absorber Replacement
Removal Procedure
1. Remove the trim panel.
2. Move the sound insulator away from the shock tower.
3. Disconnect the electrical connector (1) for the F55 suspension, if equipped.
4. Remove the upper shock mounting nuts (2).
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair) .