SRX AWD V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Secure the case extension housing bolts in the specified sequence.
Tighten the bolts to 50 N.m (37 lb ft).
5. Install the prop shaft flange.
Notice: Stake the flange nut onto the output shaft. Use the two staking grooves on the shaft to locate the staking points. Failure to stake the flange
nut may result in damage to the transmission.
Important: Use a NEW propeller shaft flange nut.
6. Install the NEW propeller shaft flange nut.
Tighten the nut to 105 N.m (77 lb ft).
