SRX AWD V6-3.6L (2008)
7. Remove the propeller shaft flange holding fixture J 45012 .
8. Install the transmission mount assembly. Refer to Transmission Mount Replacement (Rear Wheel Drive) (See: Transmission Mount/Service and
Repair/6L50/6L80/6L90 - Automatic Transmission/Transmission Mount Replacement (Rear Wheel Drive))Transmission Mount Replacement (All
Wheel Drive) (See: Transmission Mount/Service and Repair/6L50/6L80/6L90 - Automatic Transmission/Transmission Mount Replacement (All
Wheel Drive)) .
Remove the transmission jack.
Install the drive shaft. Refer to Rear Propeller Shaft Replacement (RWD) (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair/Rear Propeller Shaft Replacement (RWD)) .
Install the exhaust system. Refer to Exhaust System Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair) .
Lower the vehicle.
