SRX AWD V6-3.6L (2008)
Transmission Output Shaft Seal Replacement (Rear Wheel Drive)
Transmission Output Shaft Seal Replacement (Rear Wheel Drive)
Tools Required
*
J 45012 Holding Fixture
*
J 45000 Seal Remover
*
J 37212 Front Output Shaft Seal Installer
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the exhaust system. Refer to Exhaust System Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair) .