SRX AWD V6-3.6L (2008)
5. Install the TOC retainer bracket bolt.
Tighten the bolt to 25 N.m (18 lb ft).
6. Install new O-rings to the rear of the TOC lines.
7. Connect the TOC lines to the transmission.
8. Install the TOC line to transmission retaining bolt.
Tighten the bolt to 25 N.m (18 lb ft).
9. Connect the TOC lines to the radiator.
10. Install the LH intermediate shaft bearing assembly. Refer to Front Drive Axle Intermediate Shaft Bearing Assembly Replacement (See:
Differential Assembly/Service and Repair/Removal and Replacement/Front Drive Axle/Front Drive Axle Intermediate Shaft Bearing Assembly
Replacement) .
11. Install the engine oil filter. Refer to Engine Oil and Oil Filter Replacement (See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Engine
Oil/Service and Repair) .