SRX AWD V6-3.6L (2008)
1. Install the TOC lines.
2. Install the retainer bracket.
3. Install the retainer bracket to the TOC lines.
4. Rivet the retainer bracket to the TOC lines.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the TOC retainer bracket bolt.
Tighten the bolt to 25 N.m (18 lb ft).
6. Install new O-rings to the rear TOC lines.
7. Connect the rear TOC lines to the transmission.
8. Install the rear TOC line to transmission retainer bolt.
Tighten the bolt to 25 N.m (18 lb ft).