SRX AWD V6-3.6L (2008)
9. Connect the TOC lines to the radiator.
10. Install the LH front splash shield.
11. Install the LH front splash shield retainers.
12. Install the LH front wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
13. Install the engine oil filter. Refer to Engine Oil and Oil Filter Replacement (See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Engine
Oil/Service and Repair) .
Transmission Fluid Cooler Pipe Replacement - Front
Transmission Fluid Cooler Pipe Replacement - Front
Tools Required
*
J 39400-A Halogen Leak Detector
*
J 44827 Transmission Cooler Quick Connect
Removal Procedure
Important: It is not necessary to discharge the refrigerant from the A/C system during auxiliary transmission oil cooler (TOC) front line
replacement.
Remove the A/C condenser mounting bolts and reposition the condenser.