SRX RWD V8-4.6L VIN A (2006)
Center Console End Panel Replacement (w/ DVD)
Removal Procedure
1. Pull the rear end panel (1) to release the retainer clips securing the end panel to the console base.
2. Disconnect the power outlet electrical connector.
3. Remove the rear end panel.
Installation Procedure
1. Connect the power outlet electrical connector.
2. Locate the rear end panel (1) the console base.
3. Push the end panel in order to secure the retaining clips.
Center Console End Panel Replacement (w/o DVD)
Center Console End Panel Replacement (w/o DVD)
Removal Procedure
