STS RWD V8-4.6L (2007)
Coolant Outlet: Service and Repair
Water Outlet Housing Installation
1. Install the water outlet housing bolts (382, 388) into the water outlet housing. Ensure the longest bolt is installed in the lower left position (388).
2. Install the water outlet housing gaskets to the water outlet housing.
3. Place the water outlet housing in position to the cylinder heads while installing the bypass hose onto the engine front cover.
Notice: Refer to Fastener Notice.
4. Install the water outlet housing bolts into the cylinder heads.
Tighten the water outlet housing bolts to 25 N.m (18 lb ft).
5. Place the bypass hose clamps into position.