STS RWD V8-4.6L (2007)
2. Locate the timing alignment mark (1) on the front of the actuator.
3. Engage the actuator timing gear teeth with the secondary timing chain ensuring that the actuator alignment mark (5) corresponds with the paint
mark created on the chain link.
4. Slide the actuator over the camshaft alignment pin and install the actuator onto the camshaft.
5. Install the right intake camshaft position actuator oil control valve.
Camshaft Position Actuator Oil Control Valve Replacement - Bank 1 (Right Side) Intake
Camshaft Position Actuator Oil Control Valve Replacement - Bank 1 (Right Side) Intake
Tools Required
*
J 39946 Crankshaft Socket
*
EN 46327 Timing Chain Retention Tool
*
EN 46328 Camshaft Holding Tool
Removal Procedure
