chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Extension Housing Seal|Page 5825 > < Mainshaft Bearing/Bushing, M/T|Specifications
Page 1
background image

Seals and Gaskets: Service and Repair
Extension Housing Seal

Transmission Housing Oil Seal Replacement (Rear Seal Replacement (2WD) 

^

Tools Required 
-

J22834 Extension Housing Seal Installer.

-

J6125-1B Slide Hammer.

-

J23129 Universal Seal Remover.

-

J8614-01 Pinion Flange Holder.

Removal Procedure 

1. Raise the vehicle. Refer to Vehicle Lifting. 
2. Remove the rear propeller shaft.  

3. For 2WD models remove the following:

^

The mainshaft nut

^

The washer

^

The Yoke

4. Remove the rear oil seal from the rear case using the J6125-1B (1) and the J23129 (2). 

Installation Procedure 

Extension Housing Seal|Page 5825 > < Mainshaft Bearing/Bushing, M/T|Specifications