C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Using J22834 install the new rear oil seal into the extension housing.
2. For RWD models install the following:
^
The yoke assembly
^
A New washer
Notice: Refer to Fastener Notice in Service Precautions.
3. Install a new nut.
Using the J8614-01 tighten the Flange nut to 441 Nm (325 ft. lbs.).
4. Install the rear propeller shaft.
5. Check the transmission oil level.
6. Lower the vehicle.
