Corvette V8-6.2L (2008)
7. Remove the EVAP canister vent valve (2) from the bracket (1).
8. Disconnect the rear purge pipe (1) at the chassis purge pipe (3).
9. Cap the rear purge pipe.
10. Remove the chassis purge pipe (4) rear underbody retainer nuts (3).
11. Remove the chassis purge pipe (4) from the rear underbody retainers (2).
12. Disconnect the chassis purge pipe (4) from the side underbody retainers (6).
13. Remove the chassis purge pipe.
Installation Procedure
Caution: Refer to Fuel and EVAP Pipe Caution .
Important:
*
Follow the same routing as the original pipe.
*
Secure the pipe in order to prevent chafing.
*
Do not kink or bend the pipe.