Express 2500 V8-6.6L DSL Turbo (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Position a NEW water pump outlet pipe gasket (3) to the water pump.
Install the water pump to water pump outlet pipe studs (1) and tighten to 20 Nm (15 lb ft).
4. Install the water pump to water pump outlet pipe nuts (1) and tighten to 25 Nm (18 lb ft).
5. Install the oil separator drain pipe (6) with bolt (4) and the retainer bracket bolt (5).
6. Lower the vehicle.
VIN 6
Water Pump Outlet Pipe Replacement (LMM)
Removal Procedure