Lumina APV V6-191 3.1L (1990)
Important: Make sure that tie rod rocks freely in housing before staking inner tie rod assembly ( 18 ) or ( 48 ) to rack ( 41 ).
3. Support rack ( 41 ) and housing of inner tie rod assembly ( 18 ) or ( 48 ).
4. Stake both sides of inner tie rod housing to flats on rack ( 41 ).
Inspect: Check both stakes by inserting a 0.25 mm ( .010-inch ) feeler gage between rack ( 41 ) and tie rod housing as shown. Feeler must not pass
between rack and housing stake.
5. Slide shock dampener ( 17 ) over housing until it engages.