Tracker 4WD L4-1.6L VIN 6 (1998)
2. Install the secondary piston spring (5), the spring seat (6) and the piston (8) into the master cylinder body (1).
3. Install the primary piston (11), the cylinder cup (13) and plate (12), and the piston stopper (14) to the master cylinder body (1).
4. Compress the pistons and install the snap ring (1).
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that
application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the
fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these
instructions can help you avoid damage to parts and systems.
