Tracker 4WD L4-1.6L VIN 6 (1998)
16. Remove the following from the engine:
^
Eight bolts
^
One nut
^
The timing belt cover (1)
IMPORTANT: There are two sets of timing marks which must be aligned to ensure the correct engine timing belt installation. A notch in the
camshaft timing belt gear designed as E must be aligned with the notch in the cylinder head cover. A punch mark on the crankshaft timing belt
gear should then align with the arrow in the oil pump casting. Ensure the alignment of both sets of marks prior to the timing belt removal to ensure
correct timing belt installation and engine timing.
17. Align the timing marks on the cylinder head cover (1) and the camshaft timing belt gear (2).
18. Ensure the alignment of the timing marks on the oil pump casting (2) and the crankshaft timing belt gear (1).