Tracker 4WD L4-1.6L VIN 6 (1998)
Throttle Cable/Linkage: Adjustments
Procedure
1. Inspect the accelerator control cable for 10 to 15 mm (0.4 to 0.6-inch) of end play.
2. Loosen the adjusting nut and the cable locknut at the Throttle Body unit.
3. Adjust the accelerator control cable end play until it is within the correct specification and tighten the cable locknut and the adjusting nut. Tighten
the locknut to 25 Nm (18 lb ft).