chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Case Porosity Repair|Page 6504 > < Case Porosity Repair|Page 6502
Page 3
background image

18. Install the transmission drain plug (3) into the transmission.

^

Tighten the transmission drain plug to28 Nm (20 ft. lbs.).

19. Add approximately 1.5 liters (1.6 quarts) of synthetic 75W-90 GL4 lubricant, or equivalent into the transmission oil level/filler plug (2). Oil level

should be even with the bottom of the transmission oil level/filler plug (2) hole.

20. Apply GM P/N 12346004, or equivalent, to the threaded portion of the transmission oil level/filler plug (2).
21. Install the transmission oil level/filler plug (2) into the transmission.

^

Tighten the transmission oil level/filler plug (2) to 28 Nm (20 ft. lbs.).

22. Lower the vehicle.
23. Install four bolts to the fan shroud at the radiator.

^

Tighten the fan shroud bolts to 10 Nm (89 inch lbs.).

24. Install the gearshift control lever into the gearshift lever case. Refer to Gearshift Control Lever Installation.

Case Porosity Repair|Page 6504 > < Case Porosity Repair|Page 6502