Tracker 4WD L4-1.6L VIN 6 (1998)
Shifter M/T: Service and Repair
Gearshift Control Lever Removal
REMOVAL PROCEDURE
1. Remove the following items from the floor:
^
The two screws.
^
The two plastic retainers.
^
The rear console box.
2. Remove the following items from the floor:
^
The two screws.
^
The two plastic retainers.
^
The front console box (2).
3. Remove the gearshift control lever knob from the gearshift control lever (1) by unscrewing gearshift control lever knob counterclockwise.
4. Remove the gearshift control lever upper boot (1) from the gearshift control lever.
5. Remove the following items from the gearshift control lever:
^
The four bolts.
^
The boot plate.
^
The console box bracket (6).
^
The gearshift control lever lower boot (2).
^
The gearshift control lever.
6. Remove the following items from the gearshift lever case:
^
The clamp (4).
^
The gearshift lever case boot (5).